Calcium silicate should be prepared before the construction

For the aluminum silicate roasted silk needle blanket knowledge I believe we have to understand, in the construction before it is necessary to do enough preparation, then the aluminum silicate shredded silk needle blanket construction should be prepared before what, here we understand a bit:

    Before the construction is to be prepared, in the construction before the first familiar with the drawings, to understand the various parts of the composite wall structure and doors and windows openings location, size, elevation and other requirements. Followed by the scene into the brick and aluminum silicate shredded needles need to be based on varieties, specifications and strength levels were stacked, against chaos with the use of wrong. Aluminum silicate shredded silk needle blanket in the loading, transport, storage, the board to pad flat, mat real, layered placed. Loading and unloading to do light moving, stacked neatly, the height should not exceed two meters, and to take rain, moisture measures. Before the construction should be prepared to cut aluminum silicate scraping silk needle blanket these basic tools.

    Aluminum silicate shredded silk needle blanket blanket requirements: from bottom to top along the horizontal horizontal staggered paving. From the corner of the wall perpendicular to the vertical staggered fixed plate, to ensure that the corners at the vertical and vertical. Yin and yang staggered interlocking. Doors and windows at the corners of the corners may not be stitching, should be used to cut the whole piece of cut and the board surface perpendicular to the corner of the wall at the same paste application of fixed.

    Calcium Silicate Shredded Silk Needle Blanket is designed before laying the way. The size of the cut cut, cut the edge of the linear error should be less than 5mm, patchwork is not greater than 2mm aluminum silicate shaved silk needle blanket laying from top to bottom with each other, aluminum silicate shaved silk needle should be laid in order, when the case To the doors and windows when the hole should be consistent with the relevant Atlas requirements, so more convenient construction.