Magnesium Silicate Insulation Board
Item:Magnesium Silicate Insulation Board
Al2O3:20~25%
Bulk Density:≤1.00 g/cm3
Cold Crushing Strength:6 Mpa
Max. operation temperature:1000℃
Linear change rate on reheating 1000℃×8h:≤4.0%
Email:sales@sunriserefr.com
Get a Quotation Send Message
Overview
The board features with high structural strength, low deformation after sintering, fine heat-conducting property and dampproof, especially its physical performance is quite stable under high-temperature operation. The application of this board can promote the volume stability of the whole liner, reduce furnace surface temperature, eliminate operating force among bricks, so as to ensure furnace’s safety performance and effectively save the energy.This product is mainly used for metallurgy, building materials, furnace heat preservation, fireproof materials, etc.
The shell temperature of test ladle that takes Magnesium Silicon Thermal Insulation Board as liner is much lower than that of common ladle, which averagely reduces 75℃, while the maximum temperature reduction will be about 120℃. Therefore, the board application will facilitate to eliminate the deformation of ladle shell materials, and greatly improve operation environment of ladle. The temperature drop rate of molten steel is smaller than that of common ladle, namely average 0.3~0.5℃/min. It indicates that the heat preservation of molten steel is quite great, which can not only save energy and heat losses, but also is beneficial for the constant temperature and rate during steel casting process to ensure the smooth continuous casting.
The shell temperature of test ladle that takes Magnesium Silicon Thermal Insulation Board as liner is much lower than that of common ladle, which averagely reduces 75℃, while the maximum temperature reduction will be about 120℃. Therefore, the board application will facilitate to eliminate the deformation of ladle shell materials, and greatly improve operation environment of ladle. The temperature drop rate of molten steel is smaller than that of common ladle, namely average 0.3~0.5℃/min. It indicates that the heat preservation of molten steel is quite great, which can not only save energy and heat losses, but also is beneficial for the constant temperature and rate during steel casting process to ensure the smooth continuous casting.
Technical Data
Items | Indexes | |||
MS-100 | MS-120 | MS-130 | MS-140 | |
Al2O3 (%) | 20~25 | |||
SiO2 (%) | 35~45 | |||
MgO (%) | ≥10 | |||
Fe2O3 (%) | ≤4.0 | |||
Linear change rate on reheating 1000℃×8h,(%) | ≤4.0 | ≤3.0 | ≤2.5 | ≤2.0 |
Bulk density (g/cm3) | ≤1.00 | ≤1.20 | ≤1.30 | ≤1.40 |
Cold Crushing Strength (Mpa) | ≥6 | ≥8 | ≥10 | ≥12 |
Thermal conductivity | ||||
200℃ | ≤0.13 | ≤0.15 | ≤0.16 | ≤0.19 |
400℃ | ≤0.15 | ≤0.16 | ≤0.18 | ≤0.20 |
600℃ | ≤0.16 | ≤0.18 | ≤0.10 | ≤0.22 |
800℃ | ≤0.18 | ≤0.20 | ≤0.22 | ≤0.23 |
1000℃ | ≤0.18 | ≤0.21 | ≤0.23 | ≤0.25 |
Max. operation temperature (℃) | 1000 | 1000 | 1000 | 1000 |
Inquiry
- sales@sunriserefr.com
- 0086-371-63838939
- TOP
If you have any needs our help or are interested in our products, you can click online advisorychat with us online, or call our customer service telephone: 0086-0371-63838939. We will sincerely serve for you!
Product Category
- Fused Cast AZS
- Fused Cast AZS Block
- Fused Cast Skid Rail Block
- Fused Cast High Zirconia Block
- Fused Cast AZS Block
- Fiber Products
- Insulation Series Brick
- Fireclay Brick
- High Alumina Brick
- Corundum Brick
- Sillimanite Brick
- Mullite Brick
- Zircon Mullite Brick
- Zircon Brick
- Magnesia Brick
- Silica Brick
- Fused Cast Alumina Block
- Glass Mould Brick
Refractory Knowledge
moreCase
-
UAE to our factory inspection bri
...
-
Venezuela customer AZS fused bric
Venezuela customer AZS fused float glass furnace br...